DeatschWerks set of 4 injectors 700cc.min Fits Lotus Elise Series 1 - Type 111/ Celica ZZT231

DeatschWerks set of 4 injectors 700cc.min Fits Lotus	Elise	Series 1 - Type 111/ Celica ZZT231

Set of 4 700CC Injectors for Lotus Elise 1996-2011, Exige 2000-2011, Toyota Celica 2000-2005, MR2 1999-2007 ,Scion TC/XA/B 2004-2010


All DeatschWerks injectors feature the following:

  • E85 compatibility
  • Flow rates and set balancing in-house by DeatschWerks
  • Flow balanced to within 1-2% (flow report included)
  • Excellent spray pattern and atomization for optimized idle and tuning
  • Technical assistance and tuning data available via phone or email
  • 3-year comprehensive warranty

matched set of 4 injectors 700cc/min

Fuel Pressure Range40-100 psi
Minimum Pulse Width1.0 ms
Maximum Duty Cycle91%
Coil Impedance12.2 ohm
Injector TypeDenso Top Feed
Connector TypeToyota

 

Nominal Static Flow Rate

 

PSI >4358708090100
cc/min71180889193810011040
lb/hr67.777.084.989.395.399.0

 

Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.

 

Offset In Milliseconds (Pressure Vs Voltage)

 

PSI >
VOLTS v
4358708090100
81.872.302.342.793.618.00
91.511.741.871.952.433.79
101.281.281.471.641.782.24
111.061.101.181.251.531.61
120.820.981.041.101.281.38
130.700.830.860.901.131.15
140.630.660.760.730.910.97
150.500.530.620.670.780.85
160.440.450.500.570.710.70

 

DeatschWerks take a unique approach to high flow fuel injectors. The competitors offer only a couple different styles and sizes of injectors. Their customers are left to their own means to choose the right injector and figure out how to fit them to their car. Making a universal injector fit can be time consuming and often involves expensive fuel rails, spacers, o-rings, and electrical connectors. At DeatschWerks, injector offering is application specific. Their injectors are engineered to fit your OE harness, OE fuel rail and OE manifold. DeatschWerks customers will spend less time installing, less time tuning, and more time enjoying the increased performance of their car.

DeatschWerks fitment is application specific, but quality is always universal. Your needs may vary from 440cc or 35 lb injectors for a mild bolt-on turbo daily driver to 2200cc or 200 lb injectors for a fully-built 1000hp track monster. Either way, you get the same attention to detail and quality.

  • Beta-testing – Before a new application is released, DW put the injectors in the hands of the best tuners for that specific application. They work with them closely and collect their feedback and make any necessary changes in fitment or flow characteristics. DW do this so that when the new application is released, their end customers have as great a success as possible.
  • QA testing – every injector that is thoroughly tested in-house. They perform a battery of over 20 different tests on every injector. These tests cover every aspect of the fuel injector including: flow rates, coil operation, atomization, spray pattern, and physical attributes.
  • Flow matching – DW only produce injectors in matched sets. They started this before anyone else in the industry and still do it today. DeatschWerks injectors are not only matched statically (open flow), but also dynamically (pulsed flow). In addition, larger sized injectors get dynamic matching at 3 different pulse widths – because when you are dealing with over 1,000cc/min of flow, even small variances can make a big difference in performance.
  • Warranty and Tech Support - DeatschWerks back all of their injectors with a comprehensive 3-year warranty.

This product is compatible with the following vehicles

Vehicle Make Vehicle Model Vehicle Variant From To Engine Notes
Lotus Elise Series 1 - Type 111 1996 2001 18K4F 1.8L - RWD Petrol
Lotus Elise Series 1 - Type 111 1998 2001 2ZZGE 1.8L Sport 160 - RWD Petrol
Lotus Elise Series 1 - Type 111 1998 2001 2ZZGE 1.8L Sport 135 - RWD Petrol
Lotus Elise Series 1 - Type 111 1999 2001 1.8L Sport 190 VHPD - RWD Petrol
Lotus Elise Series 1 - Type 111 1999 2001 18K4K 1.8L 111S VVC - RWD Petrol
Lotus Elise Series 2 - Type 111 2000 2005 2ZZGE 1.8L - RWD Petrol
Lotus Elise Series 2 - Type 111 2002 2005 2ZZGE 1.8L 111/111S VVC - RWD Petrol
Lotus Elise Series 2 - Type 111 2003 2003 18K4F 1.8L 135R - RWD Petrol
Lotus Elise Series 2 - Type 111 2004 2006 2ZZGE 1.8L 111R - RWD Petrol
Lotus Elise Series 2 - Type 111 2006 2010 2ZZGE 1.8L R - RWD Petrol
Lotus Elise Series 2 - Type 111 2006 2010 1ZZFE 1.8L S - RWD Petrol
Lotus Elise Series 2 - Type 111 2008 2010 2ZZGE 1.8L SC - RWD Petrol
Lotus Elise Series 3 - Type 111 2010 2011 2ZZGE 1.8L SC - RWD Petrol
Lotus Elise Series 3 - Type 111 2010 2011 2ZZGE 1.8L R - RWD Petrol
Toyota Celica ZZT231 2000 2006 2ZZGE 1.8L - FWD Petrol
Toyota MR2 ZZW30 2000 2006 1ZZFE 1.8L - RWD Petrol

Deatschwerks haben einen einzigartigen Ansatz, unsere Hochstrominjektoren zu bauen. Andere Kraftstoff-Einspritz-Unternehmen bieten nur ein paar verschiedene Arten von Injektoren und überlassen die Anpassungen dem Kunden. Bei den Deatschwerks ist jeder Injektor, der produziert wird, "plug and play. Die Injektoren sind so konstruiert, dass sie zu Ihrem OEM-Kabelbaum, der OEM-Treibstoffschiene und dem OEM-Verteiler passen.

Alle Deatschwerks Hochstrom-Einspritzdüsen werden mit hochwertigen OEM-Kernen gebaut. Das verbessert die Montage, ermöglicht eine leichtere Abstimmung und garantiert erhöhte Zuverlässigkeit. Deatschwerks geben auf alle Produkte ein 12-monatige Garantie.

Zur Ergänzung um Leistungsspektrums, der Einspeise-Einspritzdüsen, haben die Brennstoff-System-Spezialisten Deatschwerks die bisher am weitesten fließenden Kraftstoff-Kraftstoffpumpe entwickelt. Mit einer Durchflussmenge von 300 Litern pro Stunde kommt die DW300 Pumpe mit einem anwendungsspezifischen oder universellen Montagekit und einer 3-jährigen Garantie. Die Pumpe ist 100% kompatibel mit E85 Ethanol Kraftstoff.

Deatschwerks haben auch zwei neue Hochstrom-Tankpumpen-Baureihen entwickelt, die Baureihe DW200; Mit einer unmittelbaren Durchflussrate (ca. 255LPH) und Preis im Vergleich zu den DW300 und der DW65c Serie; Eine kompakte Pumpe mit einer Durchflussmenge von ca. 265LPH und eine kompaktere Bauweise.

Google Übersetzer für Unternehmen:Translator ToolkitWebsite-Übersetzergoogle


Neue Beurteilung

Bitte anmelden oder registrieren um Beurteilung zu schreiben
  • RRP: €526,48 (incl. Tax)
  • Ex Tax: €442,42

Schnellsuche DeatschWerks, Fuel Pump, Pump