Ap Racing Rear Brake Disc Assembly Audi R8 355x32mm - Drilled

Ap Racing Rear Brake Disc Assembly Audi R8 355x32mm - Drilled

Ap Racing Rear Brake Disc Assembly Audi R8 355x32mm - Drilled

CP8080Z50 & Z51 use the latest "Float in the bell" Mounting system, this allows axial and radial float and helps eliminates drive bobbin rattle.

IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers.
- Before fitting new disc and bell assembly remove the OEM Brake caliper noise block by undoing the two Allen bolts.

Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - 
LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.

Ordering Note: 
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.

AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).

(kits do not include brake pads)

Model Type & Year2007 on
Disc Diameter & Thickness (mm)Ø355 x 32mm
Mounting bell fixing kit P/No.Contact AP Racing for details
Disc Face Type AvailableSD - Drilled
Weight - Kg8.2

This product is compatible with the following vehicles

Vehicle Make Vehicle Model Vehicle Variant From To Engine Notes
Audi R8 2008

AP Racing haben Ihren Sitz in Coventry, Großbritannien. Sie haben mehr internationalen, sportlichen Erfolg erlangt als jeder ihrer Konkurrenten und sich als ein wichtiger Lieferant auf allen Ebenen des internationalen Motorsports, einschließlich Single-Session-Rennen, Rallye, Sportwagen-Rennen und Tourenwagen etabliert. Allein im Jahr 2011 lieferte AP Racing entweder Bremsen, Kupplungen oder beides zu 30 Champions über das gesamte Spektrum der Motorsportwelt.

Neue Beurteilung

Bitte anmelden oder registrieren um Beurteilung zu schreiben
  • RRP: €661,82 (incl. Tax)
  • Ex Tax: €556,15