HKS Transmission Oil Pan Upgrade Nissan GT-R R35
HKS Transmission Oil Pan for the GR6 NISSAN GT-R R35 utilizes high strength aluminum casting "honey comb" design, which can improve the rigidity of the transmission case. The load to the internal components can be reduced, and the gears will rotate more smoothly. Since the GT-R is continuously evolving as a higher performance vehicle, reducing the load to the transmission with the HKS Oil Pan is highly effective and recommended for the longevity of the transmission.
- Replacing the oil pan can improve the strength; it provides a 30% increase in strength compared to the factory pan. The stress to the shaft bearing and gear tooth inside the transmission caused by the higher engine output and/or circuit driving can be relieved.
- HKS Oil Pan is not only effective for the tuned engine, but also for the factory engine since the oil pan prevents metal debris from entering to the transmission oil so the oil can be kept clean.
- HKS Oil Pan will be a large opening of the transmission case. The strength can be improved with simple operations.
- Using the liquid gasket* is recommended for better sealing. (Refer to the graph above.)
* It is recommended to use the TB 1217 or an equivalent. - HKS Oil Pan has additional internal ribs to improve the oil flow to the strainer. The required engine oil volume is the same as the factory’s designated volume. The factory magnet and oil level gauge must be used.
- Since two M16 sized oil outlets are on the pan's side, the oil cooler can be installed. Also, using these outlets as an oil drainer can drain almost all engine oil remained inside the oil pan.
For over 40 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 40+ years.
This product is compatible with the following vehicles
| Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
| Nissan | GT-R | R35 | 2009 | 2011 | VR38DETT | 3.8L - 4WD Petrol |
| Nissan | GT-R | R35 | 2010 | 2011 | VR38DETT | 3.8L SpecV - 4WD Petrol |
| Nissan | GT-R | R35 | 2010 | 2012 | VR38DETT | 3.8L - 4WD Petrol |
| Nissan | GT-R | R35 | 2011 | VR38DETT | 3.8L - 4WD Petrol |
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.
For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.
Forge Alloy Finned Sump for Sequential Gearbox
This replacement sump is made from a solid alloy billet, finned to aid cooling, and is supplied with..
€818,29 Ex Tax: €687,64
HKS DCT Cooler Kit Nissan GT-R
DCT Cooler Kit for GT-R R35 is available now. From the street to race circuits, the HKS DCT Co..
€2.391,90 Ex Tax: €2.010,00
