DeatschWerks set of 4 injectors 525cc/min Fits Honda Civic MK 8/ MK 7
-
DeatschWerks
- Artikelnr. 13U-01-0525-4
- Verfügbarkeit Contact us for availability
- RRP: €462,24 (incl. Tax)
- Preis ohne Steuer €388,44
Set of 4 525cc injectors for Honda Civic R18 06-08 and D17 01-05
All DeatschWerks injectors feature the following:
- E85 compatibility
- Flow rates and set balancing in-house by DeatschWerks
- Flow balanced to within 1-2% (flow report included)
- Excellent spray pattern and atomization for optimized idle and tuning
- Technical assistance and tuning data available via phone or email
- 3-year comprehensive warranty
Matched set of 4 injectors 525cc/min
| Fuel Pressure Range | 40-100 psi |
| Minimum Pulse Width | 1.2 ms |
| Maximum Duty Cycle | 91% |
| Coil Impedance | 14.8 ohm |
| Injector Type | Bosch EV6 (standard) |
| Connector Type | us-car |
Nominal Static Flow Rate
| PSI > | 43 | 58 | 70 | 80 | 90 | 100 |
| cc/min | 554 | 648 | 731 | 785 | 836 | 887 |
| lb/hr | 52.7 | 71.7 | 69.6 | 74.7 | 79.6 | 84.4 |
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
Offset in Milliseconds (Pressure vs Voltage)
PSI > Volts v | 43 | 58 | 70 | 80 | 90 | 100 |
| 8 | 1.90 | 2.22 | 2.67 | 2.99 | 3.18 | 3.71 |
| 9 | 1.35 | 1.75 | 1.95 | 2.20 | 2.33 | 2.57 |
| 10 | 1.23 | 1.50 | 1.64 | 1.79 | 1.85 | 1.95 |
| 11 | 1.05 | 1.25 | 1.39 | 1.52 | 1.55 | 1.66 |
| 12 | 0.89 | 1.10 | 1.25 | 1.27 | 1.33 | 1.40 |
| 13 | 0.73 | 0.92 | 1.05 | 1.08 | 1.04 | 1.14 |
| 14 | 0.62 | 0.83 | 0.94 | 1.01 | 0.96 | 0.99 |
| 15 | 0.50 | 0.71 | 0.85 | 0.91 | 0.80 | 0.83 |
| 16 | 0.41 | 0.63 | 0.74 | 0.79 | 0.71 | 0.78 |