DeatschWerks set of 4 injectors 950cc/min Fits Nissan Silvia Turbo/ Silvia/ LARGO
-
DeatschWerks
- Artikelnr. 02J-01-0950-4
- Verfügbarkeit
- RRP: €882,73 (incl. Tax)
- Preis ohne Steuer €741,79
Set of 4 950cc side feed injectors for Nissan G20/SR20/240sx SR20DET/KA24DE 91-98
All DeatschWerks injectors feature the following:
- E85 compatibility
- Flow rates and set balancing in-house by DeatschWerks
- Flow balanced to within 1-2% (flow report included)
- Excellent spray pattern and atomization for optimized idle and tuning
- Technical assistance and tuning data available via phone or email
- 3-year comprehensive warranty
Download Injector Characterization Summary
Matched set of 4 injectors 950cc/min
| Fuel Pressure Range | 40-80 psi |
| Minimum Pulse Width | 1.3 ms |
| Maximum Duty Cycle | 88% |
| Coil Impedance | 11.4 ohm |
| Injector Type | JECS Side Feed |
| Connector Type | JECS Nissan |
Nominal Static Flow Rate
| PSI > | 43 | 58 | 70 | 80 | 90 | 100 |
| cc/min | 977 | 1146 | 1254 | 1341 | 1422 | 1499 |
| lb/hr | 93.0 | 109.1 | 119.4 | 128.0 | 136.0 | 143.0 |
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
Offset In Milliseconds (Pressure Vs Voltage)
PSI > Volts v | 43 | 58 | 70 | 80 | 90 | 100 |
| 8 | 2.21 | 2.48 | 2.64 | |||
| 9 | 1.91 | 2.14 | 2.28 | |||
| 10 | 1.65 | 1.84 | 1.95 | |||
| 11 | 1.41 | 1.57 | 1.67 | |||
| 12 | 1.21 | 1.34 | 1.43 | |||
| 13 | 1.04 | 1.15 | 1.23 | |||
| 14 | 0.89 | 0.99 | 1.07 | |||
| 15 | 0.78 | 0.87 | 0.94 | |||
| 16 | 0.69 | 0.78 | 0.86 | |