DeatschWerks set of 6 injectors 270cc/min
-
DeatschWerks
- Artikelnr. 01J-00-0270-6
- Verfügbarkeit
- RRP: €724,40 (incl. Tax)
- Preis ohne Steuer €608,74
Set of 6 270cc side feed injectors for Nissan 300zx 90-96
Note: The DeatschWerks P1-P2 Sidefeed Injector Adapter Kit is required to install these injectors in the 90-94 Nissan 300zx only. The adapter kits can be found here.
All DeatschWerks injectors feature the following:
- E85 compatibility
- Flow rates and set balancing in-house by DeatschWerks
- Excellent spray pattern and atomization for optimized idle and tuning
- Technical assistance and tuning data available via phone or email
- 3-year comprehensive warranty
Matched set of 6 injectors 270cc/min (adaptor kit required for some years)
| Fuel Pressure Range | 40-60 psi |
| Minimum Pulse Width | 1.2 ms |
| Maximum Duty Cycle | 92% |
| Coil Impedance | 11.4 ohm |
| Injector Type | JECS Side Feed |
| Connector Type | JECS Nissan |
Nominal Static Flow Rate
| PSI > | 43 | 58 | 70 | 80 | 90 | 100 |
| cc/min | 272 | 321 | 356 | 379 | 403 | 428 |
| lb/hr | 25.9 | 30.6 | 33.9 | 36.1 | 38.1 | 40.8 |
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
Offset In Milliseconds (Pressure Vs Voltage)
PSI > | 43 psi | 58 | 70 | 80 | 90 | 100 |
| 8 | 4.92 | 8.00 | 8.00 | 8.00 | 8.00 | 8.00 |
| 9 | 1.87 | 3.34 | 8.00 | 8.00 | 8.00 | 8.00 |
| 10 | 1.39 | 1.93 | 2.84 | 4.57 | 8.00 | 8.00 |
| 11 | 0.98 | 1.37 | 1.78 | 2.06 | 3.18 | 8.00 |
| 12 | 0.50 | 1.08 | 1.24 | 1.43 | 1.95 | 2.82 |
| 13 | 0.26 | 0.82 | 1.01 | 1.16 | 1.26 | 1.84 |
| 14 | 0.19 | 0.67 | 0.79 | 0.91 | 1.00 | 1.26 |
| 15 | 0.09 | 0.46 | 0.58 | 0.73 | 0.84 | 1.01 |
| 16 | 0.05 | 0.35 | 0.39 | 0.51 | 0.60 | 0.83 |