DeatschWerks set of 4 injectors 750cc/min Fits Honda Civic CRX/ Civic MK6
-
DeatschWerks
- Artikelnr. 22S-01-0750-4
- Verfügbarkeit
- RRP: €526,48 (incl. Tax)
- Preis ohne Steuer €442,42
Set of four 750cc injectors for Honda Civic B/D/H 92-00 and Integra OBD I and II, B/D/H 91-01
All DeatschWerks injectors feature the following:
- E85 compatibility
- Flow rates and set balancing in-house by DeatschWerks
- Flow balanced to within 1-2% (flow report included)
- Excellent spray pattern and atomization for optimized idle and tuning
- Technical assistance and tuning data available via phone or email
- 3-year comprehensive warranty
Matched set of 4 injectors 750cc/min
| Fuel Pressure Range | 40-90 psi |
| Minimum Pulse Width | 1.1 ms |
| Maximum Duty Cycle | 92% |
| Coil Impedance | 14.2 ohm |
| Injector Type | Denso Top Feed |
| Connector Type | Sumitomo |
Nominal Static Flow Rate
| PSI > | 43 | 58 | 70 | 80 | 90 | 100 |
| cc/min | 740 | 891 | 979 | 1047 | 1110 | 1170 |
| lb/hr | 70.5 | 84.9 | 93.2 | 99.7 | 105.7 | 111.4 |
Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.
Offset In Milliseconds (Pressure Vs Voltage)
| PSI > VOLTS v | 43 | 58 | 70 | 80 | 90 | 100 |
| 8 | 2.15 | 2.12 | 3.15 | 3.72 | 8.00 | 8.00 |
| 9 | 1.62 | 1.74 | 2.23 | 2.89 | 3.49 | 8.00 |
| 10 | 1.48 | 1.44 | 1.70 | 1.96 | 2.49 | 3.16 |
| 11 | 1.27 | 1.10 | 1.42 | 1.50 | 1.78 | 2.16 |
| 12 | 1.12 | 0.96 | 1.08 | 1.25 | 1.27 | 1.66 |
| 13 | 0.96 | 0.88 | 0.90 | 0.96 | 1.05 | 1.23 |
| 14 | 0.89 | 0.71 | 0.78 | 0.82 | 0.90 | 1.16 |
| 15 | 0.82 | 0.62 | 0.65 | 0.65 | 0.69 | 0.86 |
| 16 | 0.71 | 0.51 | 0.57 | 0.53 | 0.63 | 0.68 |