HKS F-Con iS Timing Computer

The special harness kit for F-CON iS/F-CON VPro installation to Lancer Evolution X (CZ4A).
Easy installation to the ECU connector. You can have more option for tuning with this kit.

■ Feature

• Due to lack of the space, this item cannot be used with stock air cleaner box. Please use HKS Racing Suction Kit.
• When recovery connector is used or engine is controlled by stock ECU only although F-CON Harness remains installed, to use air flow signal wire, disconnect the bullet connector of the Green/Yellow wire first.
  Otherwise, engine may not run smoothly and check light may flash.
• White/Black wire with a female bullet connector is stock knocking sensor signal.
• Ensure to ground U-shaped terminal.
• The intake air temperature signal that is connected to F-CON is the temperature in surge tank.
• In order to use F-CON V Pro, following items are required separately.
  F-CON Universal INJ Adapter (42999-AK004)
  F-CON Universal IGN Adapter 2 (42999-AK008)
• Use F-CON V Pro version 3.3 or later.

F-CON iS can control the latest advanced engines. Just connect to a stock ECU with a vehicle specified harness without modification. HKS "F-CON iS" is a piggy-back ECU for fuel and ignition management as well as new features.

Functions for fuel and ignition controls are inherited from the previous model F-CON SZ. In addition to it, function to collect OBD II diagnosis data was added for correction of setting due to stock close-loop correction values when intake/exhaust parts are upgraded or boost level setting is changed.

> F-CON Series Specification Change Fees

* To edit the control data or settings must be done by the F-CON Dealer.