Ap Racing Rear Brake Disc Assembly Audi R8 355x32mm - Drilled
-
AP Racing
- Artikelnr. CP8080Z51SD
- Verfügbarkeit
- RRP: €661,82 (incl. Tax)
- Preis ohne Steuer €556,15
Ap Racing Rear Brake Disc Assembly Audi R8 355x32mm - Drilled
CP8080Z50 & Z51 use the latest "Float in the bell" Mounting system, this allows axial and radial float and helps eliminates drive bobbin rattle.
IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers.
IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers.
- Before fitting new disc and bell assembly remove the OEM Brake caliper noise block by undoing the two Allen bolts.
Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.
Ordering Note:
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.
AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).
(kits do not include brake pads)
Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.
Ordering Note:
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.
AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).
(kits do not include brake pads)
| Model Type & Year | 2007 on |
| Disc Diameter & Thickness (mm) | Ø355 x 32mm |
| Mounting bell fixing kit P/No. | Contact AP Racing for details |
| Disc Face Type Available | SD - Drilled |
| Weight - Kg | 8.2 |