K1 H-Beam Connecting Rods - Set of 4 - Nissan Silvia SR20 Engine

K1 H-Beam Connecting Rods - Set of 4 - Nissan Silvia SR20 Engine

Billet 4340 Steel H-Beam Design. High Quality ARP 2000 Fasteners included. Shot peened finish provides for longer life. Premium bronze wrist pin bushings. All rods are finished in the USA and held to very tight tolerances. Bores finished to +/- .0001" and weight to +/- 1 gram per end. Floating wrist pin style.

MaterialForged 4340 Steel
Length 136.25mm
Big End Diameter2.008 in
Big End Width22.73 mm
Wrist Pin Bore Diameter22 mm
Wrist Pin Journal bushing Width22.73 mm
Wrist Pin StyleFloating
Rod TypeH-Beam
Rod QuantitySold as a set of 4
Weight (grams)524
Stroker ClearanceNo

1 Technologies Mitsubishi Connecting Rods

  • Billet 4340 Steel H-Beam Design
  • Designed by in-house engineering team for high-stress racing applications
  • All rods are finished in the USA and held to very tight tolerances. Bores finished to +/- .0001" and weight to +/- 1 gram per end.


  • Shot peened for improved fatigue life
  • Premium bronze wrist pin bushings
  • High Quality ARP 2000 Fasteners included

This product is compatible with the following vehicles

Vehicle Make Vehicle Model Vehicle Variant From To Engine Notes
Nissan 200 Series 200SX 1994 2001 SR20DET 2.0L S14 - RWD Petrol
Nissan Almera N15 1996 2000 SR20DE 2.0L GTi - FWD Petrol
Nissan Primera P10 1990 1993 SR20DE 2.0L - FWD Petrol
Nissan Primera P10 1990 1996 SR20DE 2.0L eZX - FWD Petrol
Nissan Primera P10 1990 1993 SR20DE 2.0L - FWD Petrol
Nissan Primera P10 1990 1996 SR20DE 2.0L eZX - FWD Petrol
Nissan Primera P10 1993 1996 SR20DE 2.0L - FWD Petrol
Nissan Primera P10 1993 1996 SR20DE 2.0L - FWD Petrol
Nissan Primera P11 1996 1999 SR20DE 2.0L - FWD Petrol
Nissan Primera P11 1996 1999 SR20DE 2.0L - FWD Petrol
Nissan Primera P11 1997 1999 SR20DE 2.0L GT - FWD Petrol
Nissan Primera P11 1997 1999 SR20DE 2.0L GT - FWD Petrol
Nissan Primera W11 1998 1999 SR20DE 2.0L - FWD Petrol
Nissan Primera W11 1999 2002 SR20DE 2.0L - FWD Petrol
Nissan Primera P11 1999 1999 SR20DE 2.0L Dual Fuel - FWD Petrol/LPG
Nissan Primera P11-144 1999 2002 SR20DE 2.0L - FWD Petrol
Nissan Primera P11-144 1999 2002 SR20DE 2.0L - FWD Petrol
Nissan Pulsar N14 1990 1994 SR20DET 2.0L GTi-R - 4WD Petrol
Nissan Silvia 180SX 1989 1998 SR20DE 2.0L - RWD Petrol
Nissan Silvia 1994 2001 SR20DE 2.0L - RWD Petrol
Nissan Silvia 1994 2001 SR20DET 2.0L - RWD Petrol
Nissan Silvia Turbo 1994 2001 SR20DET 2.0L S14 - RWD Petrol
Nissan Silvia 1999 2003 SR20DE 2.0L S15 - RWD Petrol
Nissan Silvia Turbo 1999 2003 SR20DET 2.0L S15 - RWD Petrol
Nissan Sunny N14 1992 1994 SR20DE 2.0L e GTI - FWD Petrol
Nissan Sunny N14 1992 1993 SR20DET 2.0L GTi-R - 4WD Petrol

K1 Technologies produces "RACEREADY" rods and cranks at very affordable prices. Our connecting rods and crankshafts are a cut above the average imported rod. They are made to our designs and are held to some of the tightest accepted tolerances in the racing industry. More attention is shown to finish work than comparable products. A wide variety of sizes and applications are available, from the Sport Compact sizes through Small Block and Big Block Chevy and Mopar, including some custom and specialty sizes. Our unique design, which is original to the K1 Technologies line of connecting rods, saves weight without sacrificing strength. We use ARP bolts exclusively.

Quality and Materials
Premium 4340 steel is used to manufacture all of our connecting rods and crankshafts. We only use ARP fasteners, with ARP 2000 included standard and 625+ Custom Age bolts available as an upgrade. Bearing bore tolerances are held to +/-.0001". Bronze bushings allow for a full-floating pin. Press-fit pins are available on some rod sizes.

Process
All of our crankshafts are made from 4340 material; core hardened for increased tensile strength and fatigue life and are 100% mag particle inspected. Bearing surfaces are polished and nitrided for wear resistance. Before any finish work is done, our rods are 100% mag particle inspected. ARP bolts are installed and tightened to our exacting specifications prior to honing to insure accurate and repeatable bore geometry. All K1 Technologies connecting rods are honed in-house and sizes are held to some of the tightest accepted tolerances in the industry. Rods are weight-matched into sets and boxed, with the rotating, reciprocating and total weights noted for convenient use in the balancing process.

Neue Beurteilung

Bitte anmelden oder registrieren um Beurteilung zu schreiben
  • RRP: €684,20 (incl. Tax)
  • Ex Tax: €574,96