K1 H-Beam Single Connecting Rod
1 Technologies Mitsubishi Connecting Rods
- Billet 4340 Steel H-Beam Design
- Designed by in-house engineering team for high-stress racing applications
- All rods are finished in the USA and held to very tight tolerances. Bores finished to +/- .0001" and weight to +/- 1 gram per end.
- Shot peened for improved fatigue life
- Premium bronze wrist pin bushings
- High Quality ARP 2000 Fasteners included
This product is compatible with the following vehicles
| Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
| Nissan | Skyline | R32 GTS-25 | 1991 | 1993 | RB25DE | 2.5L - RWD Petrol |
| Nissan | Skyline | R32 GT-R | 1993 | 1994 | RB26DETT | 2.6L - 4WD Petrol |
| Nissan | Skyline | R33 GT-T | 1993 | 1998 | RB25DE | 2.5L - RWD Petrol |
| Nissan | Skyline | R33 GT-T | 1993 | 1998 | RB25DET | 2.5L - RWD Petrol |
| Nissan | Skyline | R33 GTS-25 | 1993 | 1998 | RB25DE | 2.5L - RWD Petrol |
| Nissan | Skyline | R33 GTS-4 | 1993 | 1998 | RB25DE | 2.5L - 4WD Petrol |
| Nissan | Skyline | R33 GTS-4 | 1993 | 1998 | RB25DET | 2.5L - 4WD Petrol |
| Nissan | Skyline | R33 GTS-25T | 1993 | 1998 | RB25DET | 2.5L - RWD Petrol |
| Nissan | Skyline | R33 GT-R | 1995 | 1999 | RB26DET | 2.6L - 4WD Petrol |
| Nissan | Skyline | R33 GT-R | 1995 | 1999 | RB26DETT | 2.6L - 4WD Petrol |
| Nissan | Skyline | R33 GT-R | 1997 | 1999 | RB26DET | 2.6L - 4WD Petrol |
| Nissan | Skyline | R33 GT-R | 1997 | 1999 | RB26DETT | 2.6L - 4WD Petrol |
| Nissan | Skyline | R34 GT-R | 1999 | 2001 | RB26DET | 2.6L - 4WD Petrol |
| Nissan | Skyline | R34 GT-R | 1999 | 2001 | RB26DETT | 2.6L - 4WD Petrol |
| Nissan | Skyline | R34 GT | 1999 | 2001 | RB25DE | 2.5L - RWD Petrol |
| Nissan | Skyline | R34 GT | 1999 | 2001 | RB25DET | 2.5L - RWD Petrol |
| Nissan | Skyline | R34 GT-Four | 1999 | 2001 | RB25DE | 2.5L - 4WD Petrol |
| Nissan | Skyline | R34 GT-Four | 1999 | 2001 | RB25DET | 2.5L - 4WD Petrol |
| Nissan | Skyline | R34 GT-T | 1999 | 2001 | RB25DE | 2.5L - RWD Petrol |
| Nissan | Skyline | R34 GT-T | 1999 | 2001 | RB25DET | 2.5L - RWD Petrol |
| Nissan | Skyline | V35 | 2001 | 2006 | 2.5L 250GT - RWD Petrol |
K1 Technologies produces "RACEREADY" rods and cranks at very affordable prices. Our connecting rods and crankshafts are a cut above the average imported rod. They are made to our designs and are held to some of the tightest accepted tolerances in the racing industry. More attention is shown to finish work than comparable products. A wide variety of sizes and applications are available, from the Sport Compact sizes through Small Block and Big Block Chevy and Mopar, including some custom and specialty sizes. Our unique design, which is original to the K1 Technologies line of connecting rods, saves weight without sacrificing strength. We use ARP bolts exclusively.
Quality and Materials
Premium 4340 steel is used to manufacture all of our connecting rods and crankshafts. We only use ARP fasteners, with ARP 2000 included standard and 625+ Custom Age bolts available as an upgrade. Bearing bore tolerances are held to +/-.0001". Bronze bushings allow for a full-floating pin. Press-fit pins are available on some rod sizes.
Process
All of our crankshafts are made from 4340 material; core hardened for increased tensile strength and fatigue life and are 100% mag particle inspected. Bearing surfaces are polished and nitrided for wear resistance. Before any finish work is done, our rods are 100% mag particle inspected. ARP bolts are installed and tightened to our exacting specifications prior to honing to insure accurate and repeatable bore geometry. All K1 Technologies connecting rods are honed in-house and sizes are held to some of the tightest accepted tolerances in the industry. Rods are weight-matched into sets and boxed, with the rotating, reciprocating and total weights noted for convenient use in the balancing process.
-
K1 Technologies
- Product Code: K1-033CR16122S
- Verfügbarkeit 2-3 Tage
- RRP: €196,69 (incl. Tax)
- Ex Tax: €165,29