AP Racing Master Cilinder Repair Kit 15.0mm
INSTRUCTIONS:
1) Remove rubber boot (11) and circlip (13).
2) Carefully remove internal components.
3) Replace the following. (making sure all mseals have been lubricated with brake fluid). Primary seal (1), slydring Bearing (2)Piston Washer (4) D-Ring Piston Seal (5) and the O-Ring End Cap Seal (9). (Care must be taken when assembling seals as damage maybe caused).
4) Check bore is free from debris.
5) Lubricate bore with brake fluid.
6) Re-assemble internal components into body.
7) Use new circlip (13) to secure internal components and new boot to protect from debris (11).
Ref: | Description | Included in Repair Kit |
1. | Primary Seal | Yes |
2. | Slydring Seal | Yes |
3. | M Cyl Return Spring | |
4. | Piston Washer | Yes |
5. | D-Ring Piston Seal | Yes |
6. | Cut-Off Shim | |
7. | Piston | |
8. | End Cap | |
9. | O-Ring cap Seal | Yes |
10. | Lock Nut 5/16" UNF | |
11. | Boot | Yes |
12. | Spring Guide Pin | |
13. | Circlip | Yes |
14. | Body |
|
AP Racing haben Ihren Sitz in Coventry, Großbritannien. Sie haben mehr internationalen, sportlichen Erfolg erlangt als jeder ihrer Konkurrenten und sich als ein wichtiger Lieferant auf allen Ebenen des internationalen Motorsports, einschließlich Single-Session-Rennen, Rallye, Sportwagen-Rennen und Tourenwagen etabliert. Allein im Jahr 2011 lieferte AP Racing entweder Bremsen, Kupplungen oder beides zu 30 Champions über das gesamte Spektrum der Motorsportwelt.
AP Racing Master Cilinder 15mm
A high efficiency single circuit, short push type master cylinder. Fixed through a spherical be..
€385,42 Ex Tax: €323,88