HKS F-Con iS Timing Computer
F-CON iS can control the latest advanced engines. Just connect to a stock ECU with a vehicle specified harness without modification. HKS "F-CON iS" is a piggy-back ECU for fuel and ignition management as well as new features.
Functions for fuel and ignition controls are inherited from the previous model F-CON SZ. In addition to it, function to collect OBD II diagnosis data was added for correction of setting due to stock close-loop correction values when intake/exhaust parts are upgraded or boost level setting is changed.
> F-CON Series Specification Change Fees
* To edit the control data or settings must be done by the F-CON Dealer.
HKS F-Con iS" title="HKS F-Con iS" height="688" border="0" width="731">
New Functions of F-CON iS
Video Output Display Function (NTSC only)
Output signals from F-CON iS can be displayed on a monitor.
- Up to 18 items
- Each data can be shown by bar graph and numbers.
With Screen changeover switch, items of the screen can be changed. (Items can be selected with PowerWriter.)
Basic Items :
Engine rpm, Vehicle Speed, Air Flow meter output voltage, Throttle Position, Water Temperature, Intake Air Temperature, Battery Voltage, Injector Duration, Pressure
Example
ith DB Meter I/F Unit, A/F Knock Amp. or Communication Cable, any data can be shown on monitor
- I/F Unit + Sensors
Items : Boost (Vacuum) Pressure, Oil Temperature, Water Temperature, Oil Pressure, Fuel Pressure, Exhaust Gas Temperature - A/F Knock Amp.
Items : A/F value, Knock Sensor level - Communication Harness
Items : OBD Ignition Timing, A/F Correction Value, A/F Close-Loop Value
* One of I/F Unit or Communication Cable can be connected.
â– Other Functions
AIC Function
Up to 2 additional injectors can be controlled.
Remarks: Injectors are required separately.EIDS Function
When throttle is closed, intake air returns to air flow meter and it affects to air flow meter voltage. The voltage can be fixed to a certain voltage to prevent engine stall.
Remarks: SQV is required separately.Immobilizer Function
When ignition is turned on, if switch is not at setting value, engine will not start.
Remarks: Mixture Controller is required separately.OSC
It enables Fuel setting for Stock close-loop area.
(Setting at PowerWriter shops is required.)
HKS electronic devices will provide the better driving performance and support for your vehicles.
You will need electronic control devices and software settings for the ultimate tuning performance. The electronic control devices will control the vehicles in a higher level for the best total tuning performance. Modern vehicles are equipped with sophisticated software that controls the vehicles and HKS provides easy to use for beginners and also provide supports for professional tuners.
This product is compatible with the following vehicles
| Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
| Honda | CR-Z | IMA Hybrid | 2010 | LEA-MF6 | 1.5L - FWD Petrol/Electric |
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.
For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.
