HKS Hipermax IV GT Suspension Mitsubishi Lancer Evolution X CZ4A
LANCER EVOLUTION CZ4A(X) | |
Code No. 80230-AM001 | |
▲The above photo is an item for CZ4A. | Awesome control and comfort ride on the street for a sporty drive. The new Max IV sporty suspension. |
Application | Specification | |||||||||||||||||||||||||||||||||||||
|
|
Ride Height | mm | ||||||||||||||||||||||||||||
|
*1. Height from road surface to fender arch. *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.) *3. Adjustable range (However, the lowest value may not be road legal. Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive. Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.) *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.) Caution). Actual data depends on each vehicle. |
Kit information | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Spring of Full Kit | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Specification of damper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
* The value of the damping force is at piston speed of 0.1m/sec. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
Setting data | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
* Refer to the above explanation *3 of ride height information for drivable high and low limitations. |
Test vehicle information | |||||||||||||||||||||||
| |||||||||||||||||||||||
* Test data at HKS. |
Parts List * It may be changed without prior notice. |
Point |
・Has sportiveness and still drive comfortable on the general street. ・For street drive set dial for F:22, R:22. ・If you make the front case width of less than 293mm, the stubby and tie rod might interfere with each other when full bump or full steer. ・If you make the rear case width of less than 406mm, the upper arm and body might interfere with each other when full bump. ・The data of front alignment is for negative installation of chamber adjustment bolt. ・Do not adjust rear spring seat less than minimum 406mm and roll up 15mm because it will interfere with arm. ・If you lower the front vehicle height from the stock it could interfere with tire and bumper because there is less clearance. But if it interferes please use things like wheel spacer and make sure that the tire and damper spring before driving the vehicle. |
For over 40 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 40+ years.
This product is compatible with the following vehicles
Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
Mitsubishi | Lancer | Evolution X | 2008 | 2013 | 4B11T | 2.0L FQ 360 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2008 | 2013 | 4B11TC | 2.0L FQ 300 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2008 | 2013 | 4B11 | 2.0L FQ 330 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2008 | 2013 | 4B11T | 2.0L FQ 330 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2008 | 2013 | 4B11 | 2.0L FQ 360 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2009 | 2010 | 4B11 | 2.0L FQ 400 - 4WD Petrol |
Mitsubishi | Lancer | Evolution X | 2009 | 2010 | 4B11T | 2.0L FQ 400 - 4WD Petrol |
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.
For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.