HKS Metal Head Gasket t=1.0mm b=89.5mm Toyota GT86 & Subaru BRZ
New 1.0mm thickness gasket is released as an additional item to the existing 0.5mm & 0.7mm thick bore stopper type metal head gaskets for the FA20 engine of 86 & BRZ.
This gasket provides higher bore sealing durability than stock. Use with HKS Capacity Upgrade Kit provides optimum performance of the supercharger kit.
Features
POINT-1 Maintain high seal with high power!
All three types are durable against high engine output. Stopper structure of the bore seal is designed to be separated type so it prevents leakage even under high gas-pressure at high engine output.
POINT-2 Compression Ratio for an NA engine is increased!
The t0.5 type (SC installable) for an NA engine was designed to increase the compression ratio compared to stock gasket as well as increase seal durability. As it is thinner than stock, It is the best to use for one make race with an NA engine.
POINT-3 600ps D1 spec (t=0.7mm) is produced for a supercharged engine!
The t0.7 type (SC installable) utilizes a stopper taller than the t0.5 type to provide higher bore seal durability. It is designed to withstand 600ps engine power. Compression ratio reduction at the stock displacement is only small with t0.7 so high heat efficiency can be maintained.
POINT-4 600ps (t=1.0mm) is produced for HKS Capacity Upgrade Kit!
The t1.0 type (SC installable) is designed to use with Capacity Upgrade and utilizes a stopper taller than the t0.7 type to provide higher bore seal durability. Use the t1.0 type to adjust the compression ratio of Capacity Upgrade Kit; setting range can be widened.
POINT-5 Contact surface pressure is improved!
Special coating was applied on the head and cylinder side to improve sealing performance when tightening the bolts.
The Performance requirement from Head Gasket.
As the cylinder block and head are not rigid body, when the Head Bolts are tightened, the gap between the surfaces and the surface pressure applied is not even across the whole surface. Moreover, due to combustion pressure and vibration while driving, the conditions are continually changing and the contact surface is being continually beaten. As a result, a good gasket must ensure that contact surface pressure is spread as evenly as possible and also adapt quickly to the ever changing gaps that can appear in the contact surface to maintain a good seal with good pressure.
HKS put all their know-how knowledge into engine parts from the data they have acquired from the drag race, round race, time attack and drift race. The HKS team provide Engine tuning ranging from Camshafts, Pulleys, Pistons and Rods to Timing Belts, Pump Upgrades and even Head Gaskets. The concept behind HKS engine products was to produce something the customers would truly be happy with.
This product is compatible with the following vehicles
| Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
| Subaru | BRZ | 2012 | 4U-GSE | 2.0L - RWD Petrol | ||
| Toyota | GT 86 | 2012 | 4U-GSE | 2.0L - RWD Petrol |
Whether it is engine, exhaust, suspension, or drive-train systems, there is no substitute for the performance, quality and reliability of HKS. Part-Box/Co-ordSport are an approved distributor for HKS performance and tuning products.
For over 35 years, HKS products have been put to the test in drag racing, road racing, rallying, and top speed trials. HKS equipped vehicles have captured numerous racing championships and hold claim to a myriad of competition records using many “off the shelf”, race proven HKS components. As a result, HKS has been synonymous with “performance” in the automotive aftermarket industry for the past 35+ years.
