Milltek Sport Large-bore Downpipe and De-cat
Milltek Sport Large-bore Downpipe and De-cat Must be fitted with the Milltek Sport exhaust system and requires a Stage 2 ECU remapPARTS
Either SPF2861-80 or SPF3365-80 Superpro Lower Engine Mount (required for fitment)
MSVAG04: Cast Large Bore Downpipe with De-cat
MSAU343: Connecting Pipe
Pipe Ø: 3.00" (76.20mm)
Part-Box is part of Co-ordSport Netherlands and they are the only official distributor of Milltek Sport Performance exhaust systems in the Netherlands.
We are the largest stockists and keep many systems in stock which results in a fast delivery.
Milltek Sport Cat-back Resonated (quieter) exhaust Twin 80mm GT80
PARTS
MSSE137: Centre Section
MSSE129: Rear Silencer Assembly
MSVW369: Tip Assembly
KEY FACTS
Pipe Ø: 2.50" (63.50mm)
Tip style: Twin 80mm GT80
Fitting takes from 1.00 to 1.50 hours O.E system requires cutting for removal
Part-Box is part of Co-ordSport Netherlands and they are the only official distributor of Milltek Sport Performance exhaust systems in the Netherlands.
We are the largest stockists and keep many systems in stock which results in a fast delivery.
Milltek Sport exhausts are produced in high quality type-304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque.
A Milltek Catback Exhaust System replaces the rear half of your exhaust from the catalytic converter back. This gives you the best of both worlds, improved sound and looks, but no worries about legality. Replacing stock pipework with wider, better designed Milltek pipework releases more performance from your cars engine. A new Milltek backbox and silencers will give your car a sporty, but refined sound.
-Outstanding looks
-Sporty but refined sound
-Lightweight and durable stainless steel
-Outstanding fit and quality
Milltek put a lot of work into engineering the sound of the exhaust. Anyone can make a car louder. Milltek carefully tune the silencers in the system to offer a sporty, but refined sound. The exhaust is designed to sound fierce when you drive the car hard, but not to drone at idle or when cruising.
This product is compatible with the following vehicles
| Vehicle Make | Vehicle Model | Vehicle Variant | From | To | Engine | Notes |
| Audi | A3 | 8P | 2004 | 2013 | AXX | 2.0L TFSi - FWD Petrol |
| Audi | A3 | 8P | 2004 | 2013 | AXX | 2.0L TFSi Quattro - 4WD Petrol |
| Audi | A3 | 8P | 2007 | 2013 | BYT | 1.8L TFSi - FWD Petrol |
| Audi | S3 | 8P | 2006 | 2013 | BHZ | 2.0L TFSi Quattro - 4WD Petrol |
| Seat | Leon | TSi Cupra | 2007 | 2012 | BWJ | 2.0L 240 - FWD Petrol |
| Seat | Leon | TSi | 2009 | 2013 | BWA | 2.0L 211 - FWD Petrol |
| Skoda | Octavia | TSi vRS | 2013 | 0 | CHHB | 2.0L - FWD Petrol |
| Volkswagen | Golf | MK 5 | 2004 | 2009 | AXX | 2.0L GTi - FWD Petrol |
| Volkswagen | Golf | MK 5 | 2006 | 2007 | BYD | 2.0L Edition 30 - FWD Petrol |
| Volkswagen | Golf | MK 6 | 2009 | 2013 | AXX | 2.0L GTi - FWD Petrol |
| Volkswagen | Golf | MK 6 | 2009 | 2013 | CDLF | 2.0L R 4Motion - 4WD Petrol |
| Volkswagen | Jetta | TSi | 2006 | 2011 | BPY | 2.0L - FWD Petrol |
| Volkswagen | Scirocco | TSi | 2008 | 2010 | CAWB | 2.0L 200 - FWD Petrol |
Milltek Sport offer an ever expanding comprehensive selection of Performance exhausts which build on the successes of key marques like Audi, Volkswagen and BMW. This has placed Milltek Sport at the forefront of tuning companies and owners ‘must have’ list. Milltek Sport have appointed key distributors and are currently exporting to over 70 countries around the world.
This has placed Milltek Sport at the forefront of tuning companies and owners 'must have' list.
Milltek Sport exhausts are produced in high quality type-304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek systems are increased in bore to ensure ultimate performance without the loss of mid-range torque.
-
Milltek Sport
- Product Code: SSXAU284
- Verfügbarkeit Contact us for availability
- RRP: €540,71 (incl. Tax)
- Ex Tax: €454,38